2017 Nissan Pathfinder Camshaft Position Sensor Location
The camshaft position sensor (CMPS) on a 2017 Nissan Pathfinder is located on the front of the engine, near the camshaft. It is a small, cylindrical sensor with a electrical connector.
The CMPS sends a signal to the engine control module (ECM) that indicates the position of the camshaft. This information is used by the ECM to control the timing of the engine.
The location of the CMPS can vary depending on the year and model of the vehicle. However, it is typically located on the front of the engine, near the camshaft.
To access the CMPS, you will need to remove the timing cover. This can be done by draining the engine oil and then removing the bolts that hold the timing cover in place. Once the timing cover is removed, you will be able to see the CMPS.
The CMPS is connected to the engine by a wiring harness. Be careful not to damage the wiring harness when you are removing the CMPS.
To replace the CMPS, you will need to disconnect the wiring harness and then remove the old sensor. Be sure to install the new sensor in the same orientation as the old sensor.
Once the new sensor is installed, you can replace the timing cover and fill the engine with oil.
Here are the steps on how to replace the camshaft position sensor on a 2017 Nissan Pathfinder:
- Park the car on a level surface.
- Turn off the engine and let it cool down.
- Open the hood and locate the engine.
- Locate the timing cover.
- Drain the engine oil by removing the drain plug.
- Remove the bolts that hold the timing cover in place.
- Carefully remove the timing cover.
- Locate the camshaft position sensor.
- Disconnect the wiring harness from the sensor.
- Remove the old sensor.
- Install the new sensor in the same orientation as the old sensor.
- Connect the wiring harness to the sensor.
- Replace the timing cover and tighten the bolts.
- Fill the engine with oil.
- Start the engine and check for leaks.
The CMPS is a relatively inexpensive part. However, the labor costs to replace it can be significant. If you are not comfortable replacing the sensor yourself, you can take your car to a qualified mechanic.
